Try NSE6_FAZ-7.2 Exam Valid Dumps with Instant Download Free Updates
NSE6_FAZ-7.2 Dumps First Attempt Guaranteed Success
Fortinet NSE6_FAZ-7.2 exam tests the candidates' expertise in deploying, configuring, and managing FortiAnalyzer 7.2. NSE6_FAZ-7.2 exam covers a wide range of topics such as FortiAnalyzer deployment, log collection, analysis, and reporting. It also evaluates the candidate's knowledge of advanced features such as event correlation, alerting, and forensic analysis.
NEW QUESTION # 13
What areanalytics logs on FortiAnalyzer?
- A. Logs classified as type Traffic, or type Security
- B. Logs that are compressed and saved to a log file
- C. Logs that roll over when the log file reaches a specific size
- D. Logs thatare indexed and stored in the SQL
Answer: D
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 14
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. logfiled
- B. miglogd
- C. sqlplugind
- D. oftpd
Answer: A
Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.
NEW QUESTION # 15
Which statement is true about ADOMs?
- A. A fabric ADOM can include all the device types supported by FortiAnalyzer.
- B. When a FortiAnalyzer Fabric is implemented, the default ADOM mode is set to advanced.
- C. You can change the ADOM mode only through the GUI.
- D. In normal mode, you cannot change the disk quota of the ADOM after its creation.
Answer: A
Explanation:
Regarding ADOMs (Administrative Domains) in FortiAnalyzer, a fabric ADOM is capable of including all device types that FortiAnalyzer supports. This is part of the flexibility offered by ADOMs to manage and report on logs from various devices within a Fortinet security fabric. ADOMs can be enabled to support non-FortiGate devices as well, and the root ADOM in Fabric ADOMs provides visibility into all Security Fabric devices. Additionally, it should be noted that in normal mode, you cannot assign different FortiGate VDOMs to different ADOMs, while in advanced mode, you can, which provides a more granular control over the log data from individual VDOMs.References:FortiAnalyzer 7.4.1 Administration Guide, "ADOMs" and
"ADOM device modes" sections.
NEW QUESTION # 16
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?
- A. FortiView
- B. Fabric View
- C. System Settings
- D. Log View
Answer: A
Explanation:
To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.References:FortiAnalyzer 7.4.1 Administration Guide,
"System Settings > Fabric Management" section.
NEW QUESTION # 17
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To remove the analytics logs of the device from the old database
- B. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- C. To migrate the archive logs to the new ADOM
- D. To reset the ADOM disk quota enforcement to its default value
Answer: B
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 18
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
- A. The upstream FortiGate is configured to do NAT.
- B. The traffic destination is another FoitiGate in the fabric.
- C. The downstream device cannot connect to FortiAnalyzer.
- D. Log redundancy is configured in the fabric.
Answer: C
Explanation:
In a Fortinet Security Fabric, an upstream FortiGate may create traffic logs for sessions initiated on downstream FortiGate devices if the downstream device is unable to connect to FortiAnalyzer. This allows for continuity of logging and ensures that session logs are captured and stored even if the downstream device loses its connection to the log management system.References:FortiAnalyzer 7.4.1 Administration Guide, "Fortinet Security Fabric" section.
NEW QUESTION # 19
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- B. Fabric connectors allow you to save storage costs and improve redundancy.
- C. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- D. The storage connector service does not require a separate license to send logs to the cloud platform.
Answer: A,D
NEW QUESTION # 20
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- C. Log Data Sync provides real-time log synchronization to all backup devices.
- D. By default. Log Data Sync is disabled on all backup devices.
Answer: B,C
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 21
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- C. Log Data Sync provides real-time log synchronization to all backup devices.
- D. By default. Log Data Sync is disabled on all backup devices.
Answer: B,C
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 22
What is true about FortiAnalyzer reports?
- A. The reports from one ADOM are available for all ADOMs.
- B. Reports can be saved in a CSV format.
- C. When you enable auto-cache, reports are scheduled by default.
- D. You require an output profile before reports are generated.
Answer: D
Explanation:
For FortiAnalyzer reports, an output profile must be configured before reports can be generated and sent to an external server or system. This output profile determines how the reports are distributed, whether by email, uploaded to a server, or any other supported method. The options such as auto-cache, saving reports in CSV format, or reports availability across different ADOMs are separate features/settings and not directly related to the requirement of having an output profile for report generation.
NEW QUESTION # 23
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Run execute format disk to format and restart the FortiAnalyzer device.
- B. There is no need to do anything because the disk will self-recover.
- C. Perform a hot swap of the disk.
- D. Shul down FortiAnalyzer and replace the disk.
Answer: C
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 24
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A.
- B.
- C.
Answer: A
Explanation:
The exhibit shows a packet capture with a syslog message containing a log event from a FortiGate device. This log event includes several details such as the date, time, and event message. The corresponding image that matches this packet capture would be the one which shows that the FortiGate device has logs being received in real-time, as indicated by the highlighted section in the packet capture where it mentions "real-time".
Therefore, Option A is the correct answer because it shows logs with "Real Time" status for the FortiGate-VM64 device, indicating that this FortiAnalyzer is currently receiving real-time logs from the device, matching the activity in the packet capture.References:Based on the provided exhibits and the real-time logging information, correlated with the knowledge from the FortiAnalyzer 7.2 Administrator documentation regarding log reception and device management.
NEW QUESTION # 25
Which statement is true about using aggregation mode on FortiAnalyzer?
- A. In aggregation mode, logs and content files are forwarded in real time.
- B. Aggregation mode supports log filters.
- C. Aggregation mode can work with syslog servers.
- D. Aggregation mode can be configured only on the CLI.
Answer: C
Explanation:
In aggregation mode, FortiAnalyzer stores logs received from devices and forwards them at a specified time each day to avoid duplication. It is specifically designed to work between two FortiAnalyzer units and does not support syslog or CEF servers. Additionally, aggregation mode configurations are limited to CLI commandslog-forwardandlog-forward-service.References:FortiAnalyzer 7.2 Administrator Guide,
"Aggregation" and "CLI Commands for Aggregation Mode" sections.
NEW QUESTION # 26
......
Fortinet NSE6_FAZ-7.2 certification exam is an excellent way for IT professionals to validate their skills in FortiAnalyzer 7.2 administration. NSE6_FAZ-7.2 exam covers a broad range of topics, including deployment, configuration, log analysis, and reporting. Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator certification can help individuals stand out in a competitive job market and provide employers with a measure of the candidate's expertise in FortiAnalyzer 7.2.
100% Guarantee Download NSE6_FAZ-7.2 Exam Dumps PDF Q&A: https://examdumps.passcollection.com/NSE6_FAZ-7.2-valid-vce-dumps.html
