Pass Exam Questions Efficiently With PCNSE Questions (2024)
PCNSE Questions - Truly Beneficial For Your Palo Alto Networks Exam
The PCNSE exam is a comprehensive test that covers a wide range of topics including Palo Alto Networks technologies, advanced security features, network security concepts, and best practices. PCNSE exam is designed to validate the knowledge and skills of security engineers who have experience working with the Palo Alto Networks platform. Palo Alto Networks Certified Network Security Engineer Exam certification program is intended for professionals who want to demonstrate their expertise in network security and the latest technologies.
NEW QUESTION # 83
A client is deploying a pair of PA-5000 series firewalls using High Availability (HA) in Active/Passive mode.
Which statement is true about this deployment?
- A. The HA1 IP address from each peer must be on a different subnet
- B. The two devices must share a routable floating IP address
- C. The two devices may be different models within the PA-5000 series
- D. The management port may be used for a backup control connection
Answer: D
NEW QUESTION # 84
An administrator cannot see any Traffic logs from the Palo Alto Networks NGFW in Panorama reports.
The configuration problem seems to be on the firewall.
Which settings, if configured incorrectly, most likely would stop only Traffic logs from being sent from the NGFW to Panorama?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Untill and unless log forwarding is not configured on security policy the logs will not Forwarded to any external system (Panorama or external syslog server).
NEW QUESTION # 85
Which Palo Alto Networks VM-Series firewall is valid?
- A. VM-50
- B. VM-25
- C. VM-400
- D. VM-800
Answer: A
Explanation:
Reference:
https://www.paloaltonetworks.com/products/secure-the-network/virtualized-next-generation-firewall/vm-series
https://docs.paloaltonetworks.com/vm-series/9-0/vm-series-deployment/about-the-vm-series-firewall/vm-series-m
NEW QUESTION # 86
Which statement best describes the Automated Commit Recovery feature?
- A. It performs a connectivity check between the firewall and Panorama after every configuration commit on the firewall. It reverts the configuration changes on the firewall if the check fails.
- B. It performs a connectivity check between the firewall and Panorama after every configuration commit on the firewall. It reverts the configuration changes on the firewall and on Panorama if the check fails.
- C. It restores the running configuration on a firewall if the last configuration commit fails.
- D. It restores the running configuration on a firewall and Panorama if the last configuration commit fails.
Answer: A
NEW QUESTION # 87
Which method does an administrator use to integrate all non-native MFA platforms in PAN- OS software?
- A. RADIUS
- B. DUO
- C. PingID
- D. Okta
Answer: A
NEW QUESTION # 88
An administrator has left a firewall to use the default port for all management services.
Which three functions are performed by the dataplane? (Choose three.)
- A. File blocking
- B. NTP
- C. WildFire updates
- D. antivirus
- E. NAT
Answer: B,C,E
NEW QUESTION # 89
Which two statements are true about DoS Protection and Zone Protection Profiles? (Choose two).
- A. DoS Protection Profiles are packet-based, not signature-based
- B. Zone Protection Profiles protect egress zones
- C. Zone Protection Profiles protect ingress zones
- D. DoS Protection Profiles are linked to Security policy rules
Answer: C,D
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/zone-protection-and-dos-protection/zone-defense/zo
NEW QUESTION # 90
An enterprise information Security team has deployed policies based on AD groups to restrict user access to critical infrastructure systems However a recent phisning campaign against the organization has prompted Information Security to look for more controls that can secure access to critical assets For users that need to access these systems Information Security wants to use PAN-OS multi-factor authentication (MFA) integration to enforce MFA.
What should the enterprise do to use PAN-OS MFA1?
- A. Use a Credential Phishing agent to detect prevent and mitigate credential phishing campaigns
- B. Configure a Captive Porta1 authentication policy that uses an authentication profile that references a RADIUS profile
- C. Create an authentication profile and assign another authentication factor to be used by a Captive Portal authentication policy
- D. Configure a Captive Portal authentication policy that uses an authentication sequence
Answer: B
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/authentication/configure-multi-factor-authenticatio
NEW QUESTION # 91
Which profile generates a packet threat type found in threat logs?
- A. Anti-Spyware
- B. WildFire
- C. Zone Protection
- D. Antivirus
Answer: C
Explanation:
Explanation
"Threat/Content Type (subtype) Subtype of threat log." "packet-Packet-based attack protection triggered by a Zone Protection profile."
https://docs.paloaltonetworks.com/pan-os/10-2/pan-os-admin/monitoring/use-syslog-for-monitoring/syslog-field
https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/monitoring/use-syslog-for-monitoring/syslog-field packet-Packet-based attack protection triggered by a Zone Protection profile.
NEW QUESTION # 92
An organization wishes to roll out decryption but gets some resistance from engineering leadership regarding the guest network.
What is a common obstacle for decrypting traffic from guest devices?
- A. Guest devices may not trust the CA certificate used for the forward untrust certificate.
- B. The organization has no legal authority to decrypt their traffic.
- C. Guests may use operating systems that can't be decrypted.
- D. Guest devices may not trust the CA certificate used for the forward trust certificate.
Answer: D
Explanation:
https://docs.paloaltonetworks.com/best-practices/10-2/decryption-best-practices/decryption-best-practices/plan-ssl-decryption-best-practice-deployment
https://live.paloaltonetworks.com/t5/general-topics/decrypt-guest-network-traffic/td-p/119388
NEW QUESTION # 93
Site-A and Site-B have a site-to-site VPN set up between them. OSPF is configured to dynamically create the routes between the sites. The OSPF configuration in Site-A is configured properly, but the route for the tunner is not being established. The Site-B interfaces in the graphic are using a broadcast Link Type. The administrator has determined that the OSPF configuration in Site-B is using the wrong Link Type for one of its interfaces.
Which Link Type setting will correct the error?
- A. Set tunnel. 1 to p2p
- B. Set tunnel. 1 to p2mp
- C. Set Ethernet 1/1 to p2p
- D. Set Ethernet 1/1 to p2mp
Answer: A
NEW QUESTION # 94
Refer to the exhibit.
Using the above screenshot of the ACC, what is the best method to set a global filter, narrow down Blocked User Activity, and locate the user(s) that could be compromised by a botnet?
- A. Click the hyperlink for the Zero Access.Gen threat.
- B. Click the left arrow beside the Zero Access.Gen threat.
- C. Click the source user with the highest threat count.
- D. Click the hyperlink for the hotport threat Category.
Answer: B
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/monitoring/use-the-application-command-center/int
NEW QUESTION # 95
An organization is building a Bootstrap Package to deploy Palo Alto Networks VM-Series firewalls into their AWS tenant.
Which two statements are correct regarding the bootstrap package contents? (Choose two )
- A. The /config /content and /software folders are mandatory while the /license and /plugin folders are optional
- B. The bootstrap.xml file allows for automated deployment of VM-Senes firewalls with full network and policy configurations.
- C. The init-cfg txt and bootstrap.xml files are both optional configuration items for the /config folder
- D. The directory structure must include a /config /content, /software and /license folders
- E. The bootstrap package is stored on an AFS share or a discrete container file bucket
Answer: B,D
Explanation:
https://docs.paloaltonetworks.com/vm-series/10-2/vm-series-deployment/bootstrap-the-vm- series-firewall/prepare-the-bootstrap-package#id5575318c-1de8-497a-960a-1d7417feefa6
https://docs.paloaltonetworks.com/vm-series/10-2/vm-series-deployment/bootstrap-the-vm- series-firewall/bootstrap-the-vm-series-firewall-in-aws
NEW QUESTION # 96
Which User-ID method maps IP addresses to usernames for users connecting through an
802.1x-enabled wireless network device that has no native integration with PAN-OS?software?
- A. Client Probing
- B. XML API
- C. Server Monitoring
- D. Port Mapping
Answer: C
Explanation:
To obtain user mappings from existing network services that authenticate users--such as wireless controllers, 802.1x devices, Apple Open Directory servers, proxy servers, or other Network Access Control (NAC) mechanisms--Configure User-ID to Monitor Syslog Senders for User Mapping.
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/user-id/map-ip-addresses-to- users.html#id61f141da-8b89-49c9-b34a-ed11b434d1db
NEW QUESTION # 97
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch
port which it connects.
How would an administrator configure the interface to 1Gbps?
- A. set deviceconfig system speed-duplex 1Gbps-full-duplex
- B. set deviceconfig interface speed-duplex 1Gbps-full-duplex
- C. set deviceconfig system speed-duplex 1Gbps-duplex
- D. set deviceconfig Interface speed-duplex 1Gbps-half-duplex
Answer: A
Explanation:
Explanation/Reference:
Reference: https://live.paloaltonetworks.com/t5/Configuration-Articles/How-to-Change-the-Speed-and-
Duplex-of-the-Management-Port/ta-p/59034
NEW QUESTION # 98
Which method will dynamically register tags on the Palo Alto Networks NGFW?
- A. XML API or the VM Monitoring agent on the NGFW or on the User-ID agent
- B. XML-API or the VMware API on the firewall or on the User-ID agent or the CLI
- C. Restful API or the VMWare API on the firewall or on the User-ID agent or the read-only domain controller (RODC)
- D. Restful API or the VMware API on the firewall or on the User-ID agent
Answer: A
Explanation:
Reference:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/policy/monitor-changes-in-the-virtual-environmen dynamically register tags, you can use the XML API or the VM Monitoring agent on the firewall or on the User-ID agent. Each tag is a metadata element or attribute-value pair that is registered on the firewall or Panorama. For example, IP1 {tag1, tag2,.....tag32}, w"
NEW QUESTION # 99
A firewall is configured with SSL Forward Proxy decryption and has the following four enterprise certificate authorities (Cas):
i. Enterprise-Trusted-CA; which is verified as Forward Trust Certificate (The CA is also installed in the trusted store of the end-user browser and system ) ii. Enterpnse-Untrusted-CA, which is verified as Forward Untrust Certificate iii. Enterprise-lntermediate-CA iv. Enterprise-Root-CA which is verified only as Trusted Root CA An end-user visits https //www example-website com/ with a server certificate Common Name (CN) www example-website com The firewall does the SSL Forward Proxy decryption for the website and the server certificate is not trusted by the firewall.
The end-user's browser will show that the certificate for www example-website com was issued by which of the following?
- A. Enterprise-Trusted-CA which is a self-signed CA
- B. Enterprise-Untrusted-CA which is a self-signed CA
- C. Enterprise-lntermediate-CA which was. in turn, issued by Enterprise-Root-CA
- D. Enterprise-Root-CA which is a self-signed CA
Answer: B
NEW QUESTION # 100
......
Truly Beneficial For Your Palo Alto Networks Exam: https://examdumps.passcollection.com/PCNSE-valid-vce-dumps.html
