[Nov 18, 2025] Get Latest and 100% Accurate D-PVM-OE-01 Exam Questions
Maximum Grades By Making ready With D-PVM-OE-01 Dumps
NEW QUESTION # 26
What is the correct sequence of actions performed by a PowerMax when the SRDF failback command is executed?
Answer:
Explanation:
Explanation:
1.write disable R2
2.suspend
3. Merge
4.Resume
5.read/write enable.
NEW QUESTION # 27
A Storage Administrator runs the command:
syradm list -environment -offline
What migration environments are listed?
- A. The environments controlled by and those from the systems reachable by the host performing the command.
- B. The environments where the application has been taken offline to perform the cutover.
- C. Only the environments controlled by the host from where the list command is run.
Answer: A
Explanation:
Step by Step Comprehensive Detailed Explanation:
The syradm list -environment -offline command in Solutions Enabler is used to display information about migration environments that are currently offline.
Here's what it shows:
* Controlled Environments:It lists the migration environments that are directly controlled by the host where the command is executed. These are the environments where the host acts as the primary control point for the migration.
* Reachable Environments:It also lists environments that are reachable from the host executing the command. This includes environments controlled by other hosts that are connected and accessible within the SAN fabric.
This broader scope allows administrators to get a comprehensive view of offline migration environments across their managed systems.
Why other options are incorrect:
* A. The environments where the application has been taken offline to perform the cutover:While offline environments might be associated with cutovers, the command shows all offline environments regardless of their specific stage in the migration process.
* B. Only the environments controlled by the host from where the list command is run:It also includes reachable environments, not just those directly controlled by the host.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 CLI User Guide:This guide provides detailed information about the syradm command and its various options, including the list -environment -offline command for displaying offline migration environments. You can find this document on the Dell Support website by searching for "Solutions Enabler CLI User Guide."
NEW QUESTION # 28
Which tasks can a storage administrator manage from the Data Protection menu in the Unisphere for PowerMax?
- A. Convert front-end ports to SRDF ports
- B. Configure and manage SRDF groups
- C. Configure Data Protection for z systems
- D. Review the audit log for unwanted logins
Answer: B
Explanation:
Step by Step Comprehensive Detailed Explanation:
The "Data Protection" menu in Unisphere for PowerMax provides a centralized location for managing various data protection features and functionalities. Specifically, it allows storage administrators to:
* Configure and manage SRDF groups:SRDF (Symmetrix Remote Data Facility) is a key technology for disaster recovery and data replication in PowerMax. The Data Protection menu enables administrators to create, modify, and monitor SRDF groups, establish replication relationships between devices, and control replication settings.
Why other options are incorrect:
* A. Convert front-end ports to SRDF ports:This is typically done through the "System > Hardware" or "Connectivity" sections of Unisphere, where port configurations are managed.
* C. Configure Data Protection for z Systems:While PowerMax supports mainframe environments, the specific configuration for z Systems might involve specialized tools or interfaces.
* D. Review the audit log for unwanted logins:Audit logs and security-related events are usually found in the "Monitoring" or "Security" sections of Unisphere.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Unisphere for PowerMax 10.0.0 Online Help:The online help for Unisphere provides a detailed explanation of the functionalities available in each menu, including the Data Protection menu. You can access this help within Unisphere itself or on the Dell Support website.
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a general overview of data protection features in PowerMax and how they are managed through Unisphere.
NEW QUESTION # 29
The Reserved Capacity for a PowerMax Storage Resource Pool (SRP) has been set to 15%. A TimeFinder SnapVX snapshot has been created for a Storage Group containing 10 devices. An application is actively performing read and write I/Os to these devices. The snapshot is linked to the target in Copy mode. Allocation for the SRP reaches 85%.
What will happen to the copy process?
- A. Copy to target will continue and complete
- B. Copy to target will halt
- C. Copy to target will fail
- D. Array increases compression to free up space
Answer: B
NEW QUESTION # 30
What is the correct sequence of steps to obtain PowerMax licenses and ensure the PowerMax is configured to allow the licensed features to work properly?
Answer:
Explanation:
NEW QUESTION # 31
A systems administrator is performing a configuration change on a PowerMax array. Where does the configuration manager perform the change?
- A. MMCS
- B. Host which performs the change
- C. Disk drives
- D. SYMAPI
Answer: A
NEW QUESTION # 32
Exhibit.
Which activity needs to be performed prior to the operations shown in the exhibit?
- A. Target volumes should be unmounted
- B. TTL setting should be changed
- C. Snapshot should be terminated
- D. Target volumes should be unmapped
Answer: B
NEW QUESTION # 33
Refer to the exhibit.
SRDF/Metro has been configured between two arrays using a physical witness.
When creating a new SRDF group for the configuration, why is the option to create an SRDF/Metro Witness Group greyed out?
- A. The SRDF Group Label needs to be left blank when creating an SRDF/Metro Witness Group
- B. There can only be one SRDF/Metro Witness Group between two arrays
- C. SRDF/Metro Witness Groups can only be created with CLI.
Answer: B
Explanation:
Step by Step Comprehensive Detailed Explanation:
SRDF/Metro is a high-availability solution that provides synchronous replication between two storage arrays located within a metropolitan distance. It utilizes a witness to prevent data loss in the event of a split-brain scenario (where communication between the arrays is lost).
In SRDF/Metro, there can be onlyoneWitness Group defined between two specific arrays. This Witness Group manages the witness device that acts as a tie-breaker in case of a communication failure between the arrays.
Since the exhibit shows that SRDF/Metro has already been configured between the two arrays using a physical witness, the option to create another SRDF/Metro Witness Group is grayed out because a Witness Group already exists for that pair of arrays.
Why other options are incorrect:
* B. SRDF/Metro Witness Groups can only be created with CLI:While CLI can be used, Witness Groups can also be created through Unisphere for PowerMax.
* C. The SRDF Group Label needs to be left blank when creating an SRDF/Metro Witness Group:
This is not a requirement. Witness Groups can have labels.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 SRDF Family CLI User Guide:This guide provides detailed information about SRDF/Metro configuration, including the role of the witness and the Witness Group.
You can find this document on the Dell Support website by searching for "Solutions Enabler SRDF Family CLI User Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a comprehensive overview of SRDF/Metro and its functionalities, including witness configuration and best practices.
NEW QUESTION # 34
Where are the Host l/Os directed to when the Storage Group is in a Non-Disruptive Migration CutoverReady state?
- A. Source array only
- B. Target array only
- C. Source and target arrays
- D. Held in host cache
Answer: A
NEW QUESTION # 35
Refer to the Exhibit.
Which service levels are available for CKD devices'?
- A. Service levels are not used
- B. Diamond and Platinum only
- C. Diamond, Bronze, and Optimized only
- D. All service levels
Answer: C
NEW QUESTION # 36
Place the steps in the correct order to create clone copy sessions of device groups.
Answer:
Explanation:
Explanation:
Here's the correct sequence of steps along with explanations:
Correct Order:
* Select Data Protection > Device Groups from the navigation pane.
* Why:This is the starting point within Unisphere for PowerMax. You need to navigate to the section where device groups are managed and where TimeFinder operations are initiated.
* Select a PowerMax array.
* Why:In an environment with multiple PowerMax arrays, you must specify the array on which you want to create the clone copy sessions.
* Select a group and click Create Pairs.
* Why:You are selecting the specific device group that will be the source for the clone operation and choosing the "Create Pairs" action to initiate the clone session creation process. This implies you are creating a clone from an existing group of devices.
* Select a source type and a target type.
* Why:This step defines the characteristics of the source and target devices for the clone session.
This could involve selecting from different storage groups, specifying thin or thick provisioning, or other relevant settings. Note that in a clone context, the "target type" often refers to how the clone will be linked to the source (e.g., a full copy or a linked target).
* Click Run Now to run the operation.
* Why:After configuring all the settings for the clone session, this action triggers the actual creation of the clone pairs based on the selected source and target types and other parameters.
* Click the TimeFinder Clone tab to view the list of clones.
* Why:Once the operation has been initiated, this is how you would verify that the clone sessions were created successfully and monitor their status.
* Select Data Protection > Device Groups from the navigation pane.
* Select a PowerMax array.
* Select a group and click Create Pairs.
* Select a source type and a target type.
* Click Run Now to run the operation.
* Click the TimeFinder Clone tab to view the list of clones.
NEW QUESTION # 37
From an application perspective, what should be done before performing an SRDF/S Restore operation?
- A. Stop accessing the R1 and R2 devices.
- B. Continue accessing the R1 devices Stop accessing the R2 devices.
- C. Continue accessing the R1 and R2 devices
- D. Stop accessing the R1 devices Continue accessing the R2 devices
Answer: A
Explanation:
Step by Step Comprehensive Detailed Explanation:
Before performing an SRDF/S (synchronous) Restore operation, it is crucial tostop all host I/O activityto both the R1 (source) and R2 (target) devices. This ensures data consistency and prevents potential data loss or corruption during the restore process.
Here's why:
* Data Integrity:An SRDF/S Restore operation involves copying data from the R1 device to the R2 device, overwriting any existing data on R2. If hosts are actively accessing and modifying data on either device during this process, it can lead to inconsistencies and data integrity issues.
* Synchronization:SRDF/S maintains real-time synchronization between the R1 and R2 devices.
1Performing a Restore operation while hosts are writing data can disrupt this synchronization and lead to unpredictable results.
Why other options are incorrect:
* A. Continue accessing the R1 devices. Stop accessing the R2 devices:This would leave R1 vulnerable to data inconsistencies.
* B. Stop accessing the R1 devices. Continue accessing the R2 devices:This would make R2 susceptible to data loss or corruption.
* D. Continue accessing the R1 and R2 devices:This is the most dangerous option, as it would likely lead to data integrity issues.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 SRDF Family CLI User Guide:This guide provides detailed information about SRDF operations, including Restore. It emphasizes the importance of halting host I
/O before performing such operations to ensure data consistency. You can find this document on the Dell Support website by searching for "Solutions Enabler SRDF Family CLI User Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide may offer general information about SRDF management and best practices, which would include recommendations for performing operations like Restore safely.
NEW QUESTION # 38
What is an update operation in SRDF on PowerMax arrays?
- A. process to retain the data on the target R2 side
- B. A process that initiates an incremental copy from the target R2 to the source R1
- C. A process used to return to the original production site after a failover event
- D. A process that allows separate hosts to access the same data independently
Answer: B
Explanation:
Step by Step Comprehensive Detailed Explanation:
In SRDF (Symmetrix Remote Data Facility), an "update" operation refers to a specific process where changes made on the target (R2) side are copied back to the source (R1) side. This is typically used in disaster recovery scenarios where:
* Failover:A failover occurs, and the target (R2) becomes the active production site.
* Data Modification:Data is modified or updated on the target (R2) while it's acting as the primary.
* Update Operation:An "update" is initiated to synchronize the changes from the target (R2) back to the source (R1), ensuring that the source has the latest data.
This process is crucial for maintaining data consistency and ensuring a smooth transition back to the original production site after a failover event.
Why other options are incorrect:
* A. process to retain the data on the target R2 side:This is not specific to an "update" operation. Data retention on the target is a general aspect of SRDF.
* B. A process used to return to the original production site after a failover event:While an "update" is part of the failback process, it's not the entire process itself. Failback involves other steps like reversing replication direction and restoring host access.
* D. A process that allows separate hosts to access the same data independently:This describes a different SRDF configuration (like Active/Active) and is not related to the "update" operation.
References and documents of Dell's public documentation for PowerMax Operate v.2:
* Dell Solutions Enabler 10.0.0 SRDF Family CLI User Guide:This guide provides detailed information about SRDF commands and operations, including the symrdf update command used to initiate an update from R2 to R1. You can find this document on the Dell Support website by searching for "Solutions Enabler SRDF Family CLI User Guide."
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a comprehensive overview of SRDF and its functionalities, including disaster recovery scenarios and the use of the
"update" operation.
NEW QUESTION # 39
In PowerMax VMAX All Flash and VMAX3 which thin provisioning component can be changed with SYMCLI or Unisphere?
- A. Virtual Provisioning Pool
- B. Storage Resource Pool
- C. Storage Group
- D. Disk Group
Answer: C
NEW QUESTION # 40
Place the steps to create a snapshot in Unisphere for PowerMax in the correct order
Answer:
Explanation:
Explanation:
Okay, I'm ready to arrange those steps for creating a snapshot in Unisphere for PowerMax in the correct order, based on the image provided.
Here is the correct sequence, along with explanations:
Correct Order:
* Select a PowerMax storage system from the navigation pane Storage > Storage Groups.
* Why:This is the starting point in Unisphere. You need to navigate to the "Storage Groups" section within the specific PowerMax array where you intend to create the snapshot.
* Select a Storage Group and click Protect.
* Why:You're choosing the storage group that contains the data you want to snapshot. Clicking
"Protect" initiates the process of creating a data protection operation (in this case, a snapshot).
* In the Protect Wizard, if not already selected, select Create a Snapshot using SnapVX from the Select Technology tab and click Next.
* Why:This specifies that you want to use the SnapVX technology to create a snapshot. SnapVX is the snapshot feature in PowerMax arrays.
* In the Configure SnapVX page, select whether to create a snapshot or reuse an existing snapshot along with the expiry type.
* Why:Here, you define the core parameters of the snapshot:
* Create a new snapshot:This is what you'd typically do for a new point-in-time copy.
* Reuse an existing snapshot:In some cases, you might want to update an existing snapshot.
* Expiry type:This determines how long the snapshot will be retained (e.g., a specific duration or until manually deleted).
* Click Advanced Options to see the advanced options and Enable Secure Snaps.
* Why:This allows you to configure more granular settings for the snapshot, including:
* Secure Snaps:Enabling this option prevents the snapshot from being deleted before its expiry time, adding an extra layer of protection.
* Verify the selections in the summary page, and click Run Now or Add to Job List.
* Why:This is the final step before creating the snapshot:
* Summary page:Review all the settings you've configured.
* Run Now:Immediately creates the snapshot.
* Add to Job List:Schedules the snapshot creation for later.
* Select a PowerMax storage system from the navigation pane Storage > Storage Groups.
* Select a Storage Group and click Protect.
* In the Protect Wizard, if not already selected, select Create a Snapshot using SnapVX from the Select Technology tab and click Next.
* In the Configure SnapVX page, select whether to create a snapshot or reuse an existing snapshot along with the expiry type.
* Click Advanced Options to see the advanced options and Enable Secure Snaps.
* Verify the selections in the summary page, and click Run Now or Add to Job List.
NEW QUESTION # 41
You have just presented storage to an ESXi server and want to rescan the storage adapter to ensure the server can see the new volume Based on recommended best practices, what is the preferred method to perform this task?
- A. Use the vSphere Client to perform the rescan of the host
- B. Run the command from the ESXi server with the ESX CLI enabled
- C. Run the command from a non-cluster host using the ESX CLI
- D. Use the vSphere VSI plugin to rescan the entire cluster
Answer: A
NEW QUESTION # 42
Which operation is used to perform Open Replicator migrations with minimal application down time?
- A. Cold pull
- B. Hot pull
- C. Cold push
- D. Hot push
Answer: B
NEW QUESTION # 43
What will prevent a LUN from being assigned to a second Storage Group?
- A. A LUN can only be assigned to one Storage Group
- B. Both Storage Groups have a service level assigned
- C. Storage Groups are already participating in a Masking View
- D. One of the Storage Groups is a child group
Answer: A
NEW QUESTION # 44
A customer has a clone session for the storage group DATA that is no longer needed.
Using the simulator, terminate the clone session for the storage group.
Answer:
Explanation:
See the explanation for step by step solution.
Explanation:
We need to terminate a clone session for the storage group named "DATA" in the Unisphere for PowerMax simulator.
Here's a step-by-step guide on how to do this, based on typical Unisphere functionality and the context of the question:
Steps:
1. Launch the Simulator and Navigate to the TimeFinder/Clone Section
* Open Unisphere for PowerMax in your web browser.
* Log in to the simulator (you should already be logged in with the array SID 1762 selected, based on the provided image).
* In the left-hand navigation pane, locate the section related to TimeFinder operations. This is usually found under:
* Data Protection
* Local Protection
* TimeFinder
* Expand the relevant sections and click onTimeFinder SnapVXorTimeFinder Clone(the exact wording might vary slightly in the simulator). The goal is to get to the view where you can manage clone sessions.
2. Locate the Clone Session for the "DATA" Storage Group
* The TimeFinder/Clone view will display a list of existing clone sessions.
* You need to find the session associated with the "DATA" storage group. Look for the following:
* Storage Group Name:The "DATA" storage group should be listed as the source of the clone session.
* Session Type/Mode:Verify that it's a Clone session (not a SnapVX snapshot or another type of session).
3. Select the Clone Session
* Once you've found the correct clone session for the "DATA" storage group, select it.
* You can usually do this by:
* Clicking a checkbox next to the session.
* Clicking on the session itself (if the interface allows it).
4. Terminate the Clone Session
* After selecting the clone session, look for an action button or menu option to terminate it. This might be labeled:
* "Terminate"
* "Delete"
* "Remove"
* "Fracture"(in some older versions)
* "Stop"
* Click the appropriate button to initiate the termination process.
* Confirmation:You will likely be prompted with a confirmation message to ensure you want to terminate the selected clone session. Verify that you have selected the correct session (the one for the
"DATA" storage group) and confirm the termination.
NEW QUESTION # 45
What function can a storage administrator enable on the Port Attributes page?
- A. Volume Set Addressing
- B. Select Mgt Option
- C. Manage Protocol
- D. ORS Ceiling
Answer: B
NEW QUESTION # 46
Production work has been started on the R2 devices after an 5RDF Failover operation. Where will the changes made to the R2 devices be reflected in the SRDF Query output shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 47
Which symrdf flag and operation allows new devices to be added to an active SRDF/A session without suspending the session?
- A. establish with the resume operation
- B. cons_exempt with the movepair operation
- C. cons_exempt with the modifygrp operation
- D. establish with the movepair operation
Answer: B
NEW QUESTION # 48
......
EMC D-PVM-OE-01 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Give push to your success with D-PVM-OE-01 exam questions: https://examdumps.passcollection.com/D-PVM-OE-01-valid-vce-dumps.html
