[Jun 04, 2026] 2V0-11.25 Ultimate Study Guide - PassCollection
Ultimate Guide to Prepare 2V0-11.25 Certification Exam for VCP-VCF Administrator in 2026
NEW QUESTION # 23
An Administrator is configuring the network within their VCF management domain in preparation to deploy VMware Aria Suite Lifecycle.
What are the two types of virtual networks that the Administrator could configure to support the deployment? (Choose two.)
- A. VXLAN-backed Network Pools
- B. Overlay-backed NSX Segments
- C. VLAN-backed NSX Segments
- D. VLAN-backed Port Groups
Answer: B,D
Explanation:
VLAN-backed Port Groups are used in traditional network environments where VLANs are configured on the physical switches. These port groups can be configured in the management domain to support network connectivity.
Overlay-backed NSX Segments use NSX to create virtual networks overlaid on existing physical networks, which is essential for network virtualization and communication between virtual machines, especially in a VMware Cloud Foundation environment.
NEW QUESTION # 24
What are three prerequisites for deploying an NSX Edge cluster in a VMware Cloud Foundation (VCF) solution? (Choose three.)
- A. Configure BGP as a dynamic routing protocol on the physical switches.
- B. Set up vSAN storage policies for the Edge VMs.
- C. Create DNS entries for the NSX Edge nodes.
- D. Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.
- E. Install Aria Operations and enable Edge Cluster monitoring.
- F. Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.
Answer: C,D,F
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
According to the VMware Cloud Foundation 5.2 Planning and Preparation Guide and the VMware NSX-T Data Center Installation Guide, the following are critical prerequisites before deploying an NSX Edge cluster in a VCF environment:
B . Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.
Exact Extract:
"The NSX host overlay network and the NSX Edge overlay network must be able to route traffic between each other to allow tunnel establishment and VM-to-edge connectivity." (VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide) C . Create DNS entries for the NSX Edge nodes.
Exact Extract:
"You must create forward and reverse DNS records for each NSX Edge node before deployment. DNS resolution is required for NSX Manager and general network functionality." (VMware Cloud Foundation Planning and Preparation Guide) D . Use separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.
Exact Extract:
"The NSX host overlay and the NSX Edge overlay must be on different VLANs and subnets to ensure proper logical separation and traffic flow within the NSX infrastructure." (VMware NSX-T Data Center Installation Guide, VMware Cloud Foundation Planning and Preparation Guide) Why Not the Other Options?
A: vSAN storage policies for Edge VMs are not a documented prerequisite for Edge deployment.
E: BGP configuration is required at a later stage for north-south routing, but not as a deployment prerequisite.
F: Aria Operations is optional and used for monitoring, not a deployment prerequisite.
Summary:
Before deploying an NSX Edge cluster in a VCF environment, you must:
Ensure routing between NSX host and Edge overlay VLANs (B),
Create DNS entries for the NSX Edge nodes (C),
Use separate VLAN IDs and subnets for host and Edge overlays (D).
These prerequisites are confirmed in the official VMware Cloud Foundation and NSX documentation.
NEW QUESTION # 25
Which two steps should an administrator perform to configure the backup of the VMware Cloud Foundation (VCF) SDDC Manager and NSX components to allow them to be recovered in the event of a full site failure?
(Choose two.)
- A. Configure image-based backup for the NSX Manager cluster.
- B. Configure the backup settings in SDDC Manager.
- C. Define a scheduled task in vCenter to create a snapshot of the NSX Edge cluster.
- D. Backup the NSX Manager configuration by exporting it to an archive file.
- E. Prepare an external SFTP server to store file-based backups.
Answer: B,E
Explanation:
According to the officialVMware Cloud Foundation 5.2 Administration GuideandVMware NSX Data Center documentation, the required and recommended steps to enable proper backup and recovery for the SDDC Manager and NSX Manager components are as follows:
Option B: Configure the backup settings in SDDC Manager.Exact Extract from official documentation:
"You must configure backup settings in SDDC Manager to ensure scheduled, automated backups of critical SDDC Manager configuration and inventory data. Backups are stored as files that can be used to restore SDDC Manager in case of a failure or disaster." (VMware Cloud Foundation Administration Guide - Backing Up SDDC Manager) Option D: Prepare an external SFTP server to store file-based backups.Exact Extract from official documentation:
"Configure an external SFTP server to store SDDC Manager backup files. SDDC Manager supports only file- based backups using SFTP as the storage protocol." (VMware Cloud Foundation Administration Guide - Configuring Backup Destinations) Why Not the Other Options?
Option A:Exporting an archive file from NSX Manager is a manual method and does not constitute a complete, restorable backup suitable for full site failure recovery.
Option C:Image-based backups for NSX Manager arenot supportedand can cause issues with the integrity and recoverability of NSX appliances, as per VMware best practices.
Option E:Snapshots of the NSX Edge cluster arenot supportedfor backup and recovery; VMware specifically advises against using snapshots for backup purposes of NSX appliances.
Summary:
The administrator mustconfigure the backup settings in SDDC Manager (B)andprepare an external SFTP server (D)to enable secure, automated, and restorable backups of SDDC Manager and NSX components, as recommended and required by the official VMware Cloud Foundation 5.2 documentation.
NEW QUESTION # 26
An administrator needs to ensure that network traffic is protected from interception and tampering during VM migration activities. What feature or setting should the administrator enable to achieve this?
- A. vSphere HA
- B. Encrypted vSphere vMotion
- C. vSphere DRS
- D. vSphere Virtual Machine Encryption
Answer: B
Explanation:
Encrypted vSphere vMotion ensures that network traffic is protected from interception and tampering during VM migration activities by encrypting the vMotion traffic. This feature secures the transfer of virtual machines across hosts in the vSphere environment.
NEW QUESTION # 27
An administrator has been tasked with updating the version of VMware Tools on virtual machines that have been migrated into a VMware Cloud Foundation (VCF) instance so that they are compliant with the company's security policies. The following information is shared with the administrator about this task:
The VMs have been migrated from environments running earlier releases of vSphere.
The VMs are spread across multiple clusters within a single workload domain in the VCF instance.
The upgrade must not initiate a reboot of the VMs to avoid downtime to the business.
Which three steps should the administrator perform in order to complete this task? (Choose three.)
- A. Select the cluster hosting the VMs to upgrade.
- B. Use SDDC Manager in the management domain to initiate the upgrade.
- C. Select the Upgrade to Match Host option.
- D. Select the Set Auto Update option and set its value to On.
- E. Use vSphere Lifecycle Manager in the VI workload domain vCenter to initiate the upgrade.
- F. Select the VI workload domain so that all VMs across all clusters are automatically selected.
Answer: C,D,E
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
As defined in the VMware Cloud Foundation Administration Guide and vSphere Lifecycle Manager official documentation, the correct way to upgrade VMware Tools at scale across multiple clusters and without initiating a VM reboot is as follows:
B . Use vSphere Lifecycle Manager in the VI workload domain vCenter to initiate the upgrade.
The official guidance is to use vSphere Lifecycle Manager (vLCM) for managing VMware Tools versions across VMs. This tool allows you to select multiple clusters or the entire workload domain and execute VMware Tools upgrades centrally.
D . Select the Upgrade to Match Host option.
The "Upgrade to Match Host" setting in vSphere Lifecycle Manager is specifically designed to align the VMware Tools version in the guest with the version included with the ESXi host, and can be applied without a forced VM reboot. The upgrade will complete the next time VMware Tools starts or during the next guest OS reboot or shutdown initiated by the user or other processes.
F . Select the Set Auto Update option and set its value to On.
The "Auto Update" option for VMware Tools, when set to On, allows VMware Tools to automatically update to the latest version whenever the VM is powered on or rebooted, without requiring the administrator to intervene or force a downtime event.
Why Not the Other Options?
A . Selecting the VI workload domain alone does not guarantee a compliant upgrade process; the upgrade must be triggered via Lifecycle Manager with the proper options set.
C . Selecting a single cluster would not meet the requirement for VMs spread across multiple clusters.
E . SDDC Manager does not manage or trigger VMware Tools upgrades at the VM level.
Summary:
To upgrade VMware Tools on all relevant VMs in a VCF workload domain, and to do so without forced reboots, the administrator should:
Use vSphere Lifecycle Manager in the VI workload domain vCenter (B),
Select the Upgrade to Match Host option (D),
And enable Auto Update for VMware Tools (F).
This method is fully supported by official VMware best practices and documentation.
NEW QUESTION # 28
DRAG DROP
Put the following steps in the correct order to update the driver/firmware in vSAN.
Answer:
Explanation:
A screenshot of a computer program AI-generated content may be incorrect.
NEW QUESTION # 29
DRAG DROP
Match each vSphere HA host state issue with its troubleshooting step.
Answer:
Explanation:
Explanation:
A screenshot of a computer error AI-generated content may be incorrect.
NEW QUESTION # 30
Which feature of VMware Data Services Manager enhances security and compliance?
- A. Network traffic encryption
- B. Automated workload migration
- C. Database level authentication
- D. Storage replication
Answer: C
Explanation:
VMware Data Services Manager™ offers modern database and data services management for vSphere. It is a solution that provides a data-as-a-service toolkit for on-demand provisioning and automated management of PostgreSQL and MySQL databases in vSphere environment.https://techdocs.broadcom.com/us/en/vmware-cis
/dsm/data-services-manager/2-1/about-vmware-data-services-manager.html
NEW QUESTION # 31
What is the first step to take when updating the vSAN database in a VMware Cloud Foundation environment?
- A. Download the latest HCL database from VMware
- B. Check the VMware Compatibility Guide for supported versions
- C. Place the vSAN cluster in maintenance mode
- D. Backup the vSAN database
Answer: D
Explanation:
The first step when updating the vSAN database (or performing any update to the vSAN environment) is to back up the vSAN database. This ensures that if any issues arise during the update process, the administrator can restore the environment to a previous state. This step is crucial to ensure data protection and prevent data loss.
NEW QUESTION # 32
A disk failure has occurred in a vSAN cluster.
What four steps should be taken to recover from this disk failure? (Choose four.)
- A. Rebuild the affected disk group
- B. Use the vSohere Client to check the vSAN Health Service
- C. Ensure the new disk is claimed by the vSAN cluster
- D. Replace the failed disk with a new one
- E. Perform a full resync of the vSAN objects
- F. Disable disk group encryption
Answer: A,B,C,D
Explanation:
Checking the vSAN Health Service in the vSphere Client is the first step in diagnosing the issue and verifying the status of the vSAN components after the disk failure.
Rebuilding the affected disk group is necessary to ensure that data is re-optimized and replicated in accordance with the vSAN policy.
Replacing the failed disk with a new one ensures that the storage capacity is restored.
Ensuring that the new disk is claimed by the vSAN cluster is important to ensure that it is recognized and integrated into the vSAN disk group.
NEW QUESTION # 33
An administrator successfully removed a host from a VMware vSphere cluster and decommissioned it in SDDC Manager.
What must be done before the host can be recommissioned and added back to the SDDC Manager inventory?
- A. From the host console, use the /sbin/qenerate-certifcates command to qenerate a new self-siqned certificate.
- B. Manually uninstall the NSX VIBs on the host.
- C. Reinstall ESXi on the host.
- D. Loq in to the host console and select "Reset System Configuration" from the ESXi DCUI.
Answer: D
Explanation:
Before the host can be recommissioned and added back to the SDDC Manager inventory, you must reset the system configuration. This can be done from the ESXi Direct Console User Interface (DCUI) by selecting the "Reset System Configuration" option. This will remove any previous configuration and allow the host to be re-added to the environment.
NEW QUESTION # 34
What is the primary use case for Aria Operations within the VMware Aria Suite?
- A. To automate workload deployments across multiple cloud environments.
- B. To provide comprehensive monitoring, analytics, and performance management of the cloud infrastructure.
- C. To manage and analyze log data from various sources
- D. To enable network virtualization and security.
Answer: B
Explanation:
Aria Operations (formerly known as vRealize Operations) is used to monitor, analyze, and manage the performance of cloud infrastructures, providing insights into capacity, utilization, and overall health. It helps in optimizing resources, preventing downtime, and ensuring the smooth running of applications and services in a VMware environment.
NEW QUESTION # 35
Arrange the steps in the correct order to generate a performance report in Aria Operations.
Answer:
Explanation:
NEW QUESTION # 36
An administrator's passwords for their NSX 'root', 'admin', and 'audit' accounts in the Cloud Foundation management domain expired. The administrator logged into the NSX Manager console and changed the passwords for all three accounts. The passwords are now showing a status of "Disconnected" in the SDDC Manager UI.
- A. In order to correct this issue, how can SDDC Manager be updated with the new passwords?
- B. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Remediate. - C. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Sync. - D. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Rotate.
Answer: D
Explanation:
To resolve the issue of disconnected accounts in SDDC Manager after password changes, the administrator must navigate to the Password Management section in the SDDC Manager UI. From there, the administrator can select the affected account, click the vertical ellipsis (three dots), and choose Update to enter the new password for that account, ensuring SDDC Manager is synced with the correct credentials.
NEW QUESTION # 37
An administrator is preparing to deploy VMware Aria Suite Lifecycle using SDDC Manager.
Which three are prerequisites for deploying Aria Suite Lifecycle? (Choose three.)
- A. Verify that the password for the admin(g>local user account meets the complexity requirements.
- B. Ensure that the Application Virtual Networks have been configured.
- C. Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository.
- D. Ensure that a custom SSL certificate specifying the FQDN of the appliance is available.
- E. Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components.
Answer: C,D,E
Explanation:
Ensure that a custom SSL certificate specifying the FQDN of the appliance is available: A custom SSL certificate for the FQDN of the Aria Suite Lifecycle appliance is required for secure communication between components.
Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components: Accurate NTP and DNS settings are crucial for time synchronization and proper domain resolution in the environment.
Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository: The required software bundle must be available in the local repository to ensure successful deployment.
NEW QUESTION # 38
To help troubleshoot an issue with the vSphere Supervisor, an administrator must log into the Supervisor Control Plane VMs.
Which three actions should the administrator take to meet the objective? (Choose three.)
- A. Log into the Supervisor Control Plane VM using the admin user and <password>.
- B. Obtain the <password> by running /usr/lib/vmware-wcp/decryptK8Pwd.py.
- C. Log into the vCenter Server Appliance using SSH.
- D. Update the <password> by running /usr/lib/vmware/auth/bin/chpw admin.
- E. Log into the SDDC Manager appliance using SSH.
- F. Log into the Supervisor Control Plane VM using the root user and <password>.
Answer: B,C,E
Explanation:
https://knowledge.broadcom.com/external/article/323407/troubleshooting-vsphere-with-tanzu-tkgs.html First SSH into vCenter and run /usr/lib/vmware-wcp/decryptK8Pwd.py
NEW QUESTION # 39
What is the primary purpose of configuring Role-Based Access Control (RBAC) in vCenter?
- A. To ensure vCenter runs on multiple operating systems.
- B. To enable vCenter integration with external storage systems.
- C. To provide a method for vCenter to communicate with ESXi hosts.
- D. To manage user access and permissions within the vCenter environment.
Answer: D
Explanation:
Role-Based Access Control (RBAC) in vCenter is used to define and manage user roles and permissions. It allows administrators to control who can access specific resources and perform actions within the vCenter environment. RBAC ensures that users only have access to the areas and tasks they are authorized to interact with, enhancing security and management.
NEW QUESTION # 40
......
VCP-VCF Administrator Fundamentals-2V0-11.25 Exam-Practice-Dumps: https://examdumps.passcollection.com/2V0-11.25-valid-vce-dumps.html
