[Full-Version] 2024 New Preparation Guide of Cisco 300-430 Exam
300-430 Practice Exam - 281 Unique Questions
Cisco 300-430 (Implementing Cisco Enterprise Wireless Networks) Certification Exam is designed for professionals who want to validate their skills in implementing and managing wireless networks in an enterprise environment. 300-430 exam focuses on the latest technologies, best practices, and solutions for deploying and managing wireless networks that support high-availability, mobility, and security. Implementing Cisco Enterprise Wireless Networks certification exam is one of the most popular and highly respected credentials in the wireless networking industry.
NEW QUESTION # 113
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired devices
- B. wireless devices
- C. Cisco certified wireless devices
- D. wired and wireless devices
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION # 114
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- D. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
Answer: A
Explanation:
NEW QUESTION # 115
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the global and is opening a new branch in a different location. The engineers' task is to execute all the wireless configuration and to suggest how to configure the switch ports for new Aps. Which configuration must the switching team use on the switch ports?
- A. Access mode
- B. Single mode
- C. Trunk mode
- D. Multiple VLAN
Answer: C
NEW QUESTION # 116
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
- A. Policy Profile
- B. AP Join Profile
- C. Flex Profile
- D. RF Profile
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocatio
NEW QUESTION # 117
Which three things do you need to consider prior to performing a wireless site survey? (Choose three.)
- A. The time required to assess application server locations at the customer facility.
- B. The time required to survey each potential AP location.
- C. The time required to assess customer WLAN density and throughput requirements.
- D. The time required to utilize the design mode in Cisco WCS to prepare a preliminary WLAN design to reduce on-site survey time.
- E. The time required to acquire any additional infrastructure components.
- F. The type of wireless survey tools required to perform the site survey.
Answer: B,C,F
NEW QUESTION # 118
Which role does an engineer configure for administrative access to the wireless infrastructure, using Cisco ISE, to allow configuration of the WLC syslog configuration?
- A. CONTROLLER
- B. SECURITY
- C. WIRELESS
- D. MANAGEMENT
Answer: D
NEW QUESTION # 119
A customer has a distributed wireless deployment model where the WLCs are located in the data centers.
Because the file servers are located in the data center, the traffic from the corporate WLAN
"Corp-401266017" must go through the controllers, where the guest WLAN "Guest-19283746" traffic must use the local Internet line installed in each office. Which configuration will accomplish this task?
- A. Disable Local Switching for the corporate WLAN and enable it for the guest WLAN.
- B. Disable Local Switching for the corporate and guest WLAN.
- C. Enable Local Switching for the corporate WLAN and disable it for the guest WLAN.
- D. Enable Local Switching for the corporate and guest WLAN.
Answer: C
NEW QUESTION # 120
An engineer just added anew MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520 WLC, which is located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two devices.
Which traffic must be allowed on the firewall to ensure that the MSE and WLC can communicate using NMSP?
- A. TCP 1613
- B. UDP 1613
- C. UDP 16113
- D. TCP 16113
Answer: D
NEW QUESTION # 121
A customer managing a large network has implemented location services. Due to heavy load, it is needed to load balance the data coming through NMSP from the WLCs. Load must be spread between multiple CMX servers to help optimize the data flow for APs. Which configuration in CMX meets this requirement?
- A. cmxctl config feature flags nmsplb.cmx-loadbalance true
- B. cmxctl config feature flags nmsplb.cmx-rssi-distribute true
- C. cmxctl config feature flags nmsplb.cmxgrouping true
- D. cmxctl config feature flags nmsplb.cmx-ap-grouping true
Answer: C
Explanation:
NEW QUESTION # 122
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
- A. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
- B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
- C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
- D. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/availability/high-availability/213664-configure-cmx- high-availability.html
NEW QUESTION # 123
What two actions must be taken by an engineer configuring wireless Identity-Based Networking for a WLAN to enable VLAN tagging? (Choose two.)
- A. update the RADIUS server attributes for tunnel type 64, medium type 65, and tunnel private group type 81
- B. enable VLAN Select on the wireless LAN controller and the WLAN
- C. create and apply the appropriate ACL to the WLAN
- D. configure RADIUS server with WLAN subnet and VLAN ID
- E. enable AAA override on the WLAN
Answer: A,E
NEW QUESTION # 124
An engineer is deploying centralized wireless solution with a 5508 controller. What is the most AP licenses that can be supported?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
You can order Cisco 5500 Series Controllers with support for 12, 25, 50, 100, 250 or 500 APs as the controller's base capacity. You can add additional AP capacity through capacity adder licenses available at 25,
50, 100 and 250 AP capacities. You can add the capacity adder licenses to any base license in any combination to arrive at the maximum capacity of 500 APs.
Reference: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112926-5508- wlc-license.html
NEW QUESTION # 125
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Disable DHCP proxy on the Cisco WLC.
- B. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- C. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
- D. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.htm
NEW QUESTION # 126
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
- A. MAC authentication bypass
- B. self-registration guest portal
- C. native supplicant provisioning
- D. local web auth
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/216330-ise-self- registered-guest-portal-configu.html
NEW QUESTION # 127
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. analytics
- B. detect and locate.
- C. presence
- D. connect and engage
Answer: B
Explanation:
NEW QUESTION # 128
An engineer is assembling a PCI report for compliance purposes and must include missed best practices that are related to WLAN controllers. The engineer has access to all WLCs, Cisco MSE, and Cisco Prime Infrastructure. Which method most efficiently displays a summary of inconsistencies?
- A. Cisco Prime Infrastructure reporting
- B. WLC running-config
- C. Cisco Prime Infrastructure monitoring
- D. WLC logs
Answer: C
NEW QUESTION # 129
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?
- A. 1800s
- B. 3600e
- C. 3800s
- D. 4800i
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-active-sensor/guide-c07-743929.html
NEW QUESTION # 130
An engineer deploys APs to a branch office. All AP control and management-related traffic must be tunneled to a centralized WLC via CAPWAP. All user traffic must utilize the local Internet line.
What should be configured?
- A. wireless mesh network
- B. centrally switched FlexConnect
- C. locally switched FlexConnect
- D. a WLC in local mode
Answer: C
NEW QUESTION # 131
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
.
.
.
.
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: D
NEW QUESTION # 132
A customer recently upgraded the network to Cisco SD-Access. Cisco DNA Center manages the wireless network; all SSIDs are Fabric-enabled. Cisco DNA Center must be able to classify ogue on Wire" APs. Which action must the customer take?
- A. Configure all access switches to be managed by Cisco DNA Center.
- B. Connect APs to the network using a trunk port with native VLAN.
- C. Allow SNMPv3 between Cisco DNA Center and access switches.
- D. Disable all the DCA channels under RRM on the WLC.
Answer: A
NEW QUESTION # 133
A wireless engineer is configuring LWA using ISE. The customer is a startup company and requested the wireless users to authenticate against a directory, but LDAP is unavailable. Which solution should be proposed in order to have the same security and user experience?
- A. Use a preshared key on the corporate WLAN.
- B. Use the internal database of the RADIUS server.
- C. Use Novell eDirectory.
- D. Use SAML.
Answer: C
NEW QUESTION # 134
An engineer has implemented advanced location services for a retail wireless deployment. The marketing department wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per location hosted by the provider. Which social connector must be tied into Cisco CMX to provide this service?
- A. MySpace
- B. Gmail
- C. Facebook
- D. Google+
Answer: C
Explanation:
Explanation
Graphical user interface, text Description automatically generated
NEW QUESTION # 135
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to the web portal. What must be configured to permit only admins to have access?
- A. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
- B. Traffic toward the virtual interface must be permitted.
- C. Access to Cisco ISE must be allowed on the pre authentication ACL.
- D. Management traffic from the guest network must be configured on the ACL rules.
Answer: C
Explanation:
NEW QUESTION # 136
What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?
- A. EAP-FAST with CAPWAP DTLS + port authentication
- B. EAP-TLS with 802.1x port authentication
- C. EAP-FAST with CAPWAP DTLS
- D. EAP-PEAP with 802.1x port authentication
Answer: C
Explanation:
Checked on our WLC 9800, the default AP Join Profile has EAP-FAST with CAPWAP DTLS.
NEW QUESTION # 137
......
Latest Questions 300-430 Guide to Prepare Free Practice Tests: https://examdumps.passcollection.com/300-430-valid-vce-dumps.html
